RICOH Online Configurator

RICOH MP 4054/MP 5054/MP 6054

Multifunction B&W (ARCHIVED)

Perform everyday office tasks effortlessly with the MP 4054/MP 5054/MP 6054 black and white multifunction systems. With a paper capacity of up to 4,700 sheets, these affordable devices handle long runs on paper sizes up to 11" x 17" effortlessly. For complete end-to-end document production, there are several finishing options available from the space-saving Internal Finisher to the saddle-stitch Booklet Finisher.

Please Note:

Selected items that require additional options will automatically be selected.
Some items are not compatible with other options; non-compatible options will be disabled from selection.

Step 1: Main Unit & Control Panel

	Item/Description	Tips	Item #	Thumbnail
	MP 4054MP 4054 Output Speed (Letter): 40-ppm Average Monthly Volume: 10,000 total pages/month Maximum Monthly Volume: 50,000 total pages/month Power Requirements: 110-120V, 60Hz, 12A The required wall outlet is a NEMA 5-15R (receptacle) W × D × H (inches): 23.1 × 26.8 × 37.9 W × D × H (mm): 587 × 681 × 963 Note: VM card is not pre-installed in the mainframe, however, the Java VM data is stored in the mainframe.	No tooltip available.	417036
	MP 5054MP 5054 Output Speed (Letter): 50-ppm Average Monthly Volume: 15,000 total pages/month Maximum Monthly Volume: 50,000 total pages/month Power Requirements: 110-120V, 60Hz, 12A The required wall outlet is a NEMA 5-15R (receptacle) W × D × H (inches): 23.1 × 26.8 × 37.9 W × D × H (mm): 587 × 681 × 963 Note: VM card is not pre-installed in the mainframe, however, the Java VM data is stored in the mainframe.	No tooltip available.	417046
	MP 6054MP 6054 Output Speed (Letter): 60-ppm Average Monthly Volume: 20,000 total pages/month Maximum Monthly Volume: 50,000 total pages/month Power Requirements: 110-120V, 60Hz, 12A The required wall outlet is a NEMA 5-15R (receptacle) W × D × H (inches): 23.1 × 26.8 × 37.9 W × D × H (mm): 587 × 681 × 963 Note: VM card is not pre-installed in the mainframe, however, the Java VM data is stored in the mainframe. RICOH MP 6054 cannot be installed with SR3130 or Punch Unit PU3040NA.	MP 6054 The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3130 (417589) Punch Unit PU3040NA (416615)	417056
Control Panel
	Item/Description	Tips	Item #	Thumbnail
	Smart Operation Panel Type M3Smart Operation Panel Type M3 The 10.1" Wide Super VGA resolution control panel provides intuitive touchscreen control similar to smart phones and tablets. It offers advanced Web browser functionality, drag-and-drop icons and swipe scrolling. Note: 1. Standard control panel must be removed by Service Technician. SDK Applications are not supported at this time. 2. Smart Operation Panel Type M3 cannot be installed with Browser Unit Type M12.	Smart Operation Panel Type M3 The item(s) below are not compatible with this option and cannot be selected: Browser Unit Type M12 (417080)	416910

Step 2: Paper Tray & Optional Accessories

	Item/Description	Tips	Item #
Input (Note: You must select an item below before moving to Step 3.)
	Paper Feed Unit Type PB3150 (1 x 550 Sheets)Paper Feed Unit Type PB3150 (1 x 550 Sheets) Provides an additional 550-sheets. Paper sizes up to 11" x 17". Paper weights up to 80 lb. Bond / 300 g/m². This paper feed unit lowers the total machine height, making it easy for all users to access the device (Section 508). W × D × H (inches): 23.1 × 27 × 4.7 W × D × H (mm): 587 × 686 × 119 Note: By choosing this option, the Caster Table Type M3 will be added to your configuration.	Paper Feed Unit Type PB3150 (1 x 550 Sheets) The item(s) below will be selected if this item is selected: Caster Table Type M3 (416737) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) LCIT RT3030 (1,500 Sheets) (416548) Cabinet Type F (100478FNG) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542) Bridge Unit BU3070 (416551) Punch Unit PU3050NA (416609) Punch Unit PU3060NA (416612)	416545
	Caster Table Type M3Caster Table Type M3 The caster table must be added to the configuration when the PB3150 Paper Feed Unit is selected. It provides a platform with wheels to easily move the device. Note: Caster Table Type M3 cannot be installed with any of these options: PB3220, PB3230, RT3030, Cabinet Type F, SR3140, SR3150, SR3160, SR3170, Bridge Unit BU3070, Punch Unit PU3050NA or Punch Unit PU3060NA.	Caster Table Type M3 The item(s) below will be selected if this item is selected: Paper Feed Unit Type PB3150 (1 x 550 Sheets) (416545) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) LCIT RT3030 (1,500 Sheets) (416548) Cabinet Type F (100478FNG) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542) Bridge Unit BU3070 (416551) Punch Unit PU3050NA (416609) Punch Unit PU3060NA (416612)	416737
	Paper Feed Unit PB3220 (2 x 550 Sheets)Paper Feed Unit PB3220 (2 x 550 Sheets) Provides an additional 1,100 sheets. Paper Sizes up to 11" x 17". Paper Weights up to 80 lb. Bond / 300 g/m². W × D × H (inches): 23.1 × 27 × 9.7 W × D × H (mm): 587 × 686 × 246 Note: PB3220 cannot be installed with any of these options: PB3150, Caster Table Type M3, PB3230 or Cabinet Type F.	Paper Feed Unit PB3220 (2 x 550 Sheets) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit Type PB3150 (1 x 550 Sheets) (416545) Caster Table Type M3 (416737) LCIT PB3230 (Tandem LCT) (417270) Cabinet Type F (100478FNG)	417268
	LCIT PB3230 (Tandem LCT)LCIT PB3230 (Tandem LCT) Provides an additional 2,000 sheets. Paper Sizes support 8.5" x 11" /A4. Paper Weights up to 80 lb. Bond / 300 g/m². W × D × H (inches): 23.1 × 27 × 9.7 W × D × H (mm): 587 × 686 × 246 Note: PB3230 cannot be installed with any of these options: PB3150, Caster Table Type M3, PB3220 or Cabinet Type F.	LCIT PB3230 (Tandem LCT) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit Type PB3150 (1 x 550 Sheets) (416545) Caster Table Type M3 (416737) Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) Cabinet Type F (100478FNG)	417270
	LCIT RT3030 (1,500 Sheets)LCIT RT3030 (1,500 Sheets) Provides an additional 1,500 sheets. Paper Sizes support 8.5" x 11" /A4. Paper Weights up to 80 lb. Bond / 300 g/m². W × D × H (inches): 13.4 × 21.4 × 11.4 W × D × H (mm): 340 × 544 × 290 Note: RT3030 cannot be installed with any of these options: PB3150, Caster Table Type M3 or Cabinet Type F. RT3030 must be configured with either the Paper Feed Unit PB3220 or PB3230.	LCIT RT3030 (1,500 Sheets) At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit Type PB3150 (1 x 550 Sheets) (416545) Caster Table Type M3 (416737) Cabinet Type F (100478FNG)	416548
	Cabinet Type FCabinet Type F Provides businesses with a convenient option for the storage of supplies and paper and raises the device to the optimum height. W × D × H (inches): 23.1 × 26.7 × 10 W × D × H (mm): 587 × 678 × 254 Note: Cabinet Type F cannot be installed with any of these options: PB3150, Caster Table Type M3, PB3220, PB3230 or RT3030.	Cabinet Type F The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit Type PB3150 (1 x 550 Sheets) (416545) Caster Table Type M3 (416737) Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) LCIT RT3030 (1,500 Sheets) (416548)	100478FNG

Step 3: Output & Finishing Options

Internal
	Item/Description	Tips	Item #	Thumbnail
	One-Bin Tray BN3110One-Bin Tray BN3110 Provides additional output tray above the standard Internal Tray or Optional Bridge Unit/Internal Shift Tray/Internal Finisher. Holds 125 Sheets. Allows user to separate print/fax output from copy. W × D × H (inches): 17.5 × 17.7 × 5.9 W × D × H (mm): 445 × 450 × 150	No tooltip available.	416552
	Internal Shift-Sort Tray SH3070Internal Shift-Sort Tray SH3070 The Internal Shift-Sort Tray enables the system to output copies as sets in sequential order. Each time the copies of one set or a job are delivered, the next copy is shifted to separate each set or job. Holds 250-sheets of 8.5" x 11" /A4 or smaller. Holds 125-sheets of 8.5" x 14" or larger. W × D × H (inches): 16.5 × 19.3 × 4.2 W × D × H (mm): 419 × 490 × 107 Note: Internal Shift-Sort Tray SH3070 cannot be installed with these options: SR3130, SR3140, SR3150, SR3160, SR3170, Bridge Unit BU3070, Punch Unit PU3040NA, Punch Unit PU3050NA or Punch Unit PU3060NA.	Internal Shift-Sort Tray SH3070 The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3130 (417589) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542) Bridge Unit BU3070 (416551) Punch Unit PU3040NA (416615) Punch Unit PU3050NA (416609) Punch Unit PU3060NA (416612)	416550
	Internal Finisher SR3130Internal Finisher SR3130 500-sheet Internal Finisher provides multi-position stapling and optional hole-punching. Recommended for offices with limited floor space. W × D × H (inches): 21.5 × 26.7 × 10 W × D × H (mm): 546 × 678 × 254 Note: Internal Finisher SR3130 cannot be installed with the RICOH MP 6054, or the following options: SH3070, SR3140, SR3160, SR3150, SR3170, Bridge Unit BU3070, Punch Unit PU3050NA or Punch Unit PU3060NA.	Internal Finisher SR3130 The item(s) below are not compatible with this option and cannot be selected: MP 6054 (417056) Internal Shift-Sort Tray SH3070 (416550) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542) Bridge Unit BU3070 (416551) Punch Unit PU3050NA (416609) Punch Unit PU3060NA (416612)	417589
External
	Item/Description	Tips	Item #	Thumbnail
	Finisher SR3140 (1,000 Sheet External)Finisher SR3140 (1,000 Sheet External) For offices that produce collated and stapled sets of documents, the SR3140 helps shorten production time. It offers 50-sheet, multi-position stapling, mixed sized stapling, optional hole-punching and shift-sort collating. W × D × H (inches): 22.2 × 24.4 × 37.8 W × D × H (mm): 564 × 620 × 960 Note: 1. By choosing this option, the Bridge Unit BU3070 will be added to your configuration. 2. One of the following Paper Feed Units or Cabinet must be selected to add this finisher: PB3220, PB3230 or Cabinet Type F. 3. SR3140 cannot be installed with these options: SH3070, SR3180, SR3130, SR3150, SR3160, SR3170 Punch Unit PU3060NA or Punch Unit PU3040NA.	Finisher SR3140 (1,000 Sheet External) At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) Cabinet Type F (100478FNG) The item(s) below will be selected if this item is selected: Bridge Unit BU3070 (416551) The item(s) below are not compatible with this option and cannot be selected: Internal Shift-Sort Tray SH3070 (416550) Internal Finisher SR3130 (417589) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542) Punch Unit PU3040NA (416615) Punch Unit PU3060NA (416612)	416539
	Finisher SR3160 (3,000 Sheet External)Finisher SR3160 (3,000 Sheet External) Ideal for businesses that customarily have longer runs and create stapled or hole punched documents, the 3,000-Sheet Finisher handles paper sizes up to 12" x 18" and paper weights up to 80 lb. Bond/166 lb. Index (300 g/m²). It offers 50-sheet multi-position stapling, mixed sized stapling, optional hole-punching and shift-sort collating. W × D × H (inches): 25.9 × 24.1 × 37.8 W × D × H (mm): 658 × 612 × 960 Note: 1. By choosing this option, the Bridge Unit BU3070 will be added to your configuration. 2. One of the following Paper Feed Units or Cabinet must be selected to add this finisher: PB3220, PB3230 or Cabinet Type F. 3. SR3160 cannot be installed with these options: SH3070, SR3130, SR3140, SR3150, SR3170, Punch Unit PU3040NA or Punch Unit PU3050NA.	Finisher SR3160 (3,000 Sheet External) At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) Cabinet Type F (100478FNG) The item(s) below will be selected if this item is selected: Bridge Unit BU3070 (416551) The item(s) below are not compatible with this option and cannot be selected: Internal Shift-Sort Tray SH3070 (416550) Internal Finisher SR3130 (417589) Finisher SR3140 (1,000 Sheet External) (416539) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542) Punch Unit PU3040NA (416615) Punch Unit PU3050NA (416609)	416541
	Booklet Finisher SR3150 (1,000 Sheet External)Booklet Finisher SR3150 (1,000 Sheet External) Allows documents to be professionally finished as paginated, saddle-stitched booklets. It provides three destinations for output, and offers optional hole-punching. Ideal for the production of program guides, instruction sheets, newsletters and meeting agendas. W × D × H (inches): 22.2 × 24.4 × 37.8 W × D × H (mm): 564 × 620 × 960 Note: 1. By choosing this option, the Bridge Unit BU3070 will be added to your configuration. 2. One of the following Paper Feed Units or Cabinet must be selected to add this finisher: PB3220, PB3230 or Cabinet Type F. 3. SR3150 cannot be installed with these options: SH3070, SR3180, SR3130, SR3140, SR3160, SR3170 Punch Unit PU3060NA or Punch Unit PU3040NA.	Booklet Finisher SR3150 (1,000 Sheet External) At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) Cabinet Type F (100478FNG) The item(s) below will be selected if this item is selected: Bridge Unit BU3070 (416551) The item(s) below are not compatible with this option and cannot be selected: Internal Shift-Sort Tray SH3070 (416550) Internal Finisher SR3130 (417589) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3170 (2,000 Sheet External) (416542) Punch Unit PU3040NA (416615) Punch Unit PU3060NA (416612)	416540
	Booklet Finisher SR3170 (2,000 Sheet External)Booklet Finisher SR3170 (2,000 Sheet External) Features RICOH's own flat-fold function, where the paper is pressed through a second set of rollers, one above and one below, making a crease along the outer spine. The result is a slimmer, flatter saddle-stitched booklet with a professional appearance. In addition to producing paginated, saddle-stitched documents, the SR3170 provides three destinations for output, optional hole-punching and handles paper sizes up to 12" x 18" and paper weights up to 80 lb. Bond/166 lb. Index (300 g/m²). W × D × H (inches): 25.9 × 24.1 × 37.8 W × D × H (mm): 658 × 612 × 960 Note: 1. By choosing this option, the Bridge Unit BU3070 will be added to your configuration. 2. One of the following Paper Feed Units or Cabinet must be selected to add this finisher: PB3220, PB3230 or Cabinet Type F. 3. SR3160 cannot be installed with these options: SH3070, SR3130, SR3140, SR3150, SR3160, Punch Unit PU3040NA or Punch Unit PU3050NA.	Booklet Finisher SR3170 (2,000 Sheet External) At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (2 x 550 Sheets) (417268) LCIT PB3230 (Tandem LCT) (417270) Cabinet Type F (100478FNG) The item(s) below will be selected if this item is selected: Bridge Unit BU3070 (416551) The item(s) below are not compatible with this option and cannot be selected: Internal Shift-Sort Tray SH3070 (416550) Internal Finisher SR3130 (417589) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Punch Unit PU3040NA (416615) Punch Unit PU3050NA (416609)	416542
	Bridge Unit BU3070Bridge Unit BU3070 A required accessory when the main unit is configured with an external finisher. The Bridge Unit transports pages from the standard exit area into a Finisher for online stapling or hole-punching. Note: One of the following finishers must be selected to add this option: SR3140, SR3150, SR3160 or SR3170.	Bridge Unit BU3070 At least one of the item(s) below must be selected to be able to select this item: Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542) The item(s) below are not compatible with this option and cannot be selected: Internal Shift-Sort Tray SH3070 (416550) Internal Finisher SR3130 (417589) Punch Unit PU3040NA (416615)	416551
Hole-Punching (Note: Only one option can be selected from this section)
	Item/Description	Tips	Item #	Thumbnail
	Punch Unit PU3040NAPunch Unit PU3040NA Optional hole punching option for the SR3130. Note: 1. The following finisher must be selected to add this option: SR3130. 2. Punch Unit PU3040NA cannot be installed with these finishers: SR3180, SR3140, SH3070 or SR3150.	Punch Unit PU3040NA At least one of the item(s) below must be selected to be able to select this item: Internal Finisher SR3130 (417589) The item(s) below are not compatible with this option and cannot be selected: Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3150 (1,000 Sheet External) (416540) Booklet Finisher SR3170 (2,000 Sheet External) (416542)	416615
	Punch Unit PU3050NAPunch Unit PU3050NA Optional hole punching option for either the SR3140 or SR3150. Note: 1. One of the following finishers must be selected to add this option: SR3140 or SR3150. 2. Punch Unit PU3050NA cannot be installed with the SR3180, SH3070 or SR3130.	Punch Unit PU3050NA At least one of the item(s) below must be selected to be able to select this item: Finisher SR3140 (1,000 Sheet External) (416539) Booklet Finisher SR3150 (1,000 Sheet External) (416540) The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3130 (417589) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3170 (2,000 Sheet External) (416542)	416609
	Punch Unit PU3060NAPunch Unit PU3060NA Optional hole punching option for either the SR3160 or SR3170. Note: 1. One of the following finishers must be selected to add this option: SR3160 or SR3170. 2. Punch Unit PU3050NA cannot be installed with the SR3130, SR3140 or SR3150.	Punch Unit PU3060NA At least one of the item(s) below must be selected to be able to select this item: Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3170 (2,000 Sheet External) (416542) The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3130 (417589) Finisher SR3140 (1,000 Sheet External) (416539) Booklet Finisher SR3150 (1,000 Sheet External) (416540)	416612

Step 4: Print/Scan Options

Network Environment
	Item/Description	Tips	Item #	Thumbnail
	IEEE1284 Interface Board Type AIEEE1284 Interface Board Type A Allows device connection with legacy computer equipment. Note: IEEE1284 Interface Board Type A cannot be installed with these options: IEEE802.11a/b/g/n Interface Unit Type M2 or File Format Converter Type E.	IEEE1284 Interface Board Type A The item(s) below are not compatible with this option and cannot be selected: IEEE802.11a/b/g/n Interface Unit Type M2 (416572) File Format Converter Type E (414007)	411699
	IEEE802.11a/b/g/n Interface Unit Type M2IEEE802.11a/b/g/n Interface Unit Type M2 Allows MFP device to connect to the network over WiFi. Useful for temporary sites and locations where cabling is impractical. Note: IEEE802.11a/b/g/n Interface Unit Type M2 cannot be installed with these options: IEEE1284 Interface Board Type A or File Format Converter Type E.	IEEE802.11a/b/g/n Interface Unit Type M2 The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) File Format Converter Type E (414007)	416572
	PostScript3 Unit Type M12PostScript3 Unit Type M12 Required for Macintosh and PostScript printing environments. Recommended for printing more complex and PDF files.	No tooltip available.	417079
	SD Card for NetWare Printing Type M12SD Card for NetWare Printing Type M12 Used by customers who print using Netware. This option is required for the following functions: Use of iPrint ports, SNMP via IPX and Scan to NCP (IPX, TCP/IP).	No tooltip available.	417081
	File Format Converter Type EFile Format Converter Type E Required to convert format and drag to the desktop documents stored via Copy or Print mode. Note: File Format Converter Type E cannot be installed with these options: IEEE1284 Interface Board Type A or IEEE802.11a/b/g/n Interface Unit Type M2.	File Format Converter Type E The item(s) below are not compatible with this option and cannot be selected: Smart Operation Panel Type M3 (416910) IEEE1284 Interface Board Type A (411699) IEEE802.11a/b/g/n Interface Unit Type M2 (416572)	414007
Cloud Based Options
	Item/Description	Tips	Item #	Thumbnail
	Browser Unit Type M12Browser Unit Type M12 Web based applications, such as ICE and HotSpot require Browser capability which is standard on devices configured with the Smart Operation Panel. This option is required when ICE and/or HotSpot are configured with the Standard Operation Panel. Note: Browser Unit Type M12 cannot be installed with Smart Operation Panel Type M3.	Browser Unit Type M12 The item(s) below are not compatible with this option and cannot be selected: Smart Operation Panel Type M3 (416910)	417080
	HotSpot MFP Option Type SHotSpot MFP Option Type S Required to enable HotSpot printing. One year HotSpot subscription service included. This option will not be available until May 2015.	HotSpot MFP Option Type S The item(s) below will be selected if this item is selected: Browser Unit Type M12 (417080)	415620
Printing / Scanning Features
	Item/Description	Tips	Item #	Thumbnail
	OCR Unit Type M2OCR Unit Type M2 Allows the creation of searchable PDFs when scanning. Users can search the finished documents for specific words by using electronic search functions. Searchable PDF files can be sent to email, folders and external media (SD/USB).	No tooltip available.	416605
	IPDS Unit Type M12IPDS Unit Type M12 Intelligent Printer Data Stream (IPDS). As a 'genuine' IPDS solution built on original IBM source code, our IPDS option provides more accurate interpretation of IPDS data. That means less errors and faster file processing than emulations. Plus, as an IBM partner your customers can be assured of fast problem resolution and timely upgrades. This option will not be available until May 2015.	No tooltip available.	417082
	XPS Direct Print Option Type M12XPS Direct Print Option Type M12 This option allows Networked users to print XPS/OXPS format documents from a connected Windows PC without using a printer driver. It also enables walk-up users to print XPS/OXPS files stored on portable media by inserting a USB flash drive or SD card into the ports integrated into the control panel.	No tooltip available.	417083

Step 5: Fax Options

Item/Description	Tips	Item #
Fax Option Type M12Fax Option Type M12 Installation required to enable fax features: 33.6Kbps, approximately 2 Second Transmission Speed, Standard JBIG. Standard 320 Pages Memory. Includes standard Internet Fax (T.37), LAN Fax, IP-Fax (T.38), Fax Forwarding to Email & Paperless Fax function.	Fax Option Type M12 The item(s) below are not compatible with this option and cannot be selected: Type MP 2554 Removable Hard Drive (RHD) (MXRHDMP2554RA) Type MP 2554 Additional Removable Hard Drive (ARHD) (MXARHDMP2554RA)	417100
Fax Connection Unit Type M12Fax Connection Unit Type M12 Enables users to send and receive faxes on a sub MFP via a main MFP. This option is required on both the Main MFP that has the Fax Option Type M12 (417100) installed and on the Sub MFP(s) needing remote fax.	Fax Connection Unit Type M12 The item(s) below are not compatible with this option and cannot be selected: Type MP 2554 Removable Hard Drive (RHD) (MXRHDMP2554RA) Type MP 2554 Additional Removable Hard Drive (ARHD) (MXARHDMP2554RA)	417078
G3 Interface Unit Type M12G3 Interface Unit Type M12 Up to two additional lines can be installed. For a maximum total of 3 lines. Note: By choosing this option, Fax Option Type M12 will be added to your configuration.	G3 Interface Unit Type M12 The item(s) below will be selected if this item is selected: Fax Option Type M12 (417100) The item(s) below are not compatible with this option and cannot be selected: Type MP 2554 Removable Hard Drive (RHD) (MXRHDMP2554RA) Type MP 2554 Additional Removable Hard Drive (ARHD) (MXARHDMP2554RA)	417101
Memory Unit Type M12 (64MB)Memory Unit Type M12 (64MB) Increases fax memory to 2,240 pages and fax resolution to 400 x 400 dpi. Note: By choosing this option, Fax Option Type M12 will be added to your configuration.	Memory Unit Type M12 (64MB) The item(s) below will be selected if this item is selected: Fax Option Type M12 (417100) The item(s) below are not compatible with this option and cannot be selected: Type MP 2554 Removable Hard Drive (RHD) (MXRHDMP2554RA) Type MP 2554 Additional Removable Hard Drive (ARHD) (MXARHDMP2554RA)	MX417102RA

Step 6: Security & Miscellaneous Accessories

Item/Description	Tips	Item #
Type MP 2554 Removable Hard Drive (RHD)Type MP 2554 Removable Hard Drive (RHD) The RHD kit uses the MFP's internal hard drive and makes it external. Note: Type MP 2554 Removable Hard Drive (RHD) cannot be installed with Fax Option Type M12, Fax Connection Unit Type M12, G3 Interface Unit Type M12 and 64MB Memory Unit Type M12.	Type MP 2554 Removable Hard Drive (RHD) The item(s) below are not compatible with this option and cannot be selected: Fax Option Type M12 (417100) Fax Connection Unit Type M12 (417078) G3 Interface Unit Type M12 (417101) Memory Unit Type M12 (64MB) (MX417102RA)	MXRHDMP2554RA
Type MP 2554 Additional Removable Hard Drive (ARHD)Type MP 2554 Additional Removable Hard Drive (ARHD) The ARHD includes an extra hard drive. Note: 1. By choosing this option, Type MP 2554 Removable Hard Drive (RHD) will be added to your configuration. 2. Type MP 2554 Additional Removable Hard Drive (ARHD) cannot be installed with Fax Option Type M12, Fax Connection Unit Type M12, G3 Interface Unit Type M12 and 64MB Memory Unit Type M12.	Type MP 2554 Additional Removable Hard Drive (ARHD) The item(s) below will be selected if this item is selected: Type MP 2554 Removable Hard Drive (RHD) (MXRHDMP2554RA) The item(s) below are not compatible with this option and cannot be selected: Fax Option Type M12 (417100) Fax Connection Unit Type M12 (417078) G3 Interface Unit Type M12 (417101) Memory Unit Type M12 (64MB) (MX417102RA)	MXARHDMP2554RA
Optional Counter Interface Unit Type M12Optional Counter Interface Unit Type M12 20-Pin Interface used to attach External Key Counter or Key Card Device.	No tooltip available.	417111
Key Counter Bracket Type M3Key Counter Bracket Type M3 Used to mount external key counter to MFP.	No tooltip available.	416869
Card Reader Bracket Type 3352Card Reader Bracket Type 3352 Table shaped option used to place either card reader or counter device. USB Connector.	No tooltip available.	415814
ESP XG-PCS-15DESP XG-PCS-15D Our Advanced Technical Support (ATS) recommends the use of Power Protection products to minimize potential electrical interference with products.	No tooltip available.	006428MIU
Copy Data Security Unit Type GCopy Data Security Unit Type G Prevents unauthorized copying of confidential documents that were created on other printers that have this option installed.	No tooltip available.	416391
Smart Card Reader Built-in Unit Type M12Smart Card Reader Built-in Unit Type M12 This option is a cover and a card reader is not included. For use with 3rd party card readers like RFIdeas PCProx readers on our price list. The card reader and its cable would not be visible when this option is used. If using another type card reader be sure reader dimensions do not exceed 63.5mm x 106mm x 22mm in size. Note: This option cannot be installed with the External Keyboard Bracket Type M3 or External USB Keyboard (No Bracket).	Smart Card Reader Built-in Unit Type M12 The item(s) below are not compatible with this option and cannot be selected: External Keyboard Bracket Type M3 (416909) External USB Keyboard (No Bracket) (100266FNG)	417129
Certified DataOverwrite Security System Type ICertified DataOverwrite Security System Type I This is an ISO 15408 Certified version of DOSS that overwrites Copy, Print, Scan, and Fax latent data. Mainframe is targeted to be IEEE 2600 certified in January 2015.	No tooltip available.	416372
External Keyboard Bracket Type M3External Keyboard Bracket Type M3 This bracket is required for the installation of External USB Keyboard. Note: This option cannot be installed with the External Smart Card Reader Built-in Unit Type M12.	External Keyboard Bracket Type M3 The item(s) below will be selected if this item is selected: External USB Keyboard (No Bracket) (100266FNG) The item(s) below are not compatible with this option and cannot be selected: Smart Card Reader Built-in Unit Type M12 (417129)	416909
External USB Keyboard (No Bracket)External USB Keyboard (No Bracket) External Keyboard for inputting data with either SDK applications or embedded applications. Note: By choosing this option, External Keyboard Bracket Type M3 will be added to your configuration.	External USB Keyboard (No Bracket) The item(s) below will be selected if this item is selected: External Keyboard Bracket Type M3 (416909) The item(s) below are not compatible with this option and cannot be selected: Smart Card Reader Built-in Unit Type M12 (417129)	100266FNG

Step 7: Supplies

Item/Description	Tips	Item #
Print Cartridge MP 6054Print Cartridge MP 6054 Unit Packaging: 1 Bottle (1046 g.) Yield (CTN): 37,000 pages	No tooltip available.	842126
Staple Set Type T for Internal Finisher SR3130/SR3140/ SR3160/SR3170 (Normal Stapling)Staple Set Type T for Internal Finisher SR3130/SR3140/ SR3160/SR3170 (Normal Stapling) Unit Packaging: 5,000 per Crtg. (1 Crtg/Ctn) Note: SR3130, SR3140, SR3160 or SR3170 must be selected to add this supply.	Staple Set Type T for Internal Finisher SR3130/SR3140/ SR3160/SR3170 (Normal Stapling) At least one of the item(s) below must be selected to be able to select this item: Internal Finisher SR3130 (417589) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3170 (2,000 Sheet External) (416542)	415009
Staple Refill Type T for Internal Finisher SR3130/SR3140/ SR3160/SR3170 (Normal Stapling)Staple Refill Type T for Internal Finisher SR3130/SR3140/ SR3160/SR3170 (Normal Stapling) Unit Packaging: 5,000 per Crtg. (2 Crtg/Ctn) Total: 10,000 Note: SR3130, SR3140, SR3160 or SR3170 must be selected to add this supply	Staple Refill Type T for Internal Finisher SR3130/SR3140/ SR3160/SR3170 (Normal Stapling) At least one of the item(s) below must be selected to be able to select this item: Internal Finisher SR3130 (417589) Finisher SR3140 (1,000 Sheet External) (416539) Finisher SR3160 (3,000 Sheet External) (416541) Booklet Finisher SR3170 (2,000 Sheet External) (416542)	415010
Staple Set Type W for SR3170 (Saddle Stitch)Staple Set Type W for SR3170 (Saddle Stitch) Unit Packaging: 2,000 per Crtg. (1 Crtg/Ctn) Note: SR3170 must be selected to add this supply.	Staple Set Type W for SR3170 (Saddle Stitch) At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR3170 (2,000 Sheet External) (416542)	416710
Staple Refill Type W for SR3170 (Saddle Stitch)Staple Refill Type W for SR3170 (Saddle Stitch) Unit Packaging: 2,000 per Crtg. (4 Crtg/Ctn) Total: 8,000 Note: SR3170 must be selected to add this supply.	Staple Refill Type W for SR3170 (Saddle Stitch) At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR3170 (2,000 Sheet External) (416542)	416712
Staple Set Type S for SR3150 (Normal and Saddle Stitch) Uses Type K Refill Staple Set Type S for SR3150 (Normal and Saddle Stitch) Uses Type K Refill Unit Packaging: 5,000 per Crtg. (1 Crtg/Ctn) Note: SR3150 must be selected to add this supply.	Staple Set Type S for SR3150 (Normal and Saddle Stitch) Uses Type K Refill At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR3150 (1,000 Sheet External) (416540)	412874
Staple Refill Type K for SR3150 (Normal and Saddle Stitch)Staple Refill Type K for SR3150 (Normal and Saddle Stitch) Unit Packaging: 5,000 per Crtg. (3 Crtg/Ctn) Total: 15,000 Note: SR3150 must be selected to add this supply.	Staple Refill Type K for SR3150 (Normal and Saddle Stitch) At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR3150 (1,000 Sheet External) (416540)	410802

Complete Your Configuration

Start Over

Standard Features Include

9" Color Touch Control Panel
220-Sheet SPDF
B/W PCL Printing
Up to 1200dpi Printing
B/W & Color Scanning

Scan to/Print from USB/SD
2 x 550 Sheet Paper Trays
100-Sheet Bypass Tray
Duplex
320GB HDD
2GB RAM
Java VM
Non-Common Criteria
DOSS & HDD Encryption

Show More Features

Current Configuration

W × D × H 0" × 0" × 0"
0mm × 0mm × 0mm

View Selected Items

Step 1: Main Unit & Control Panel

MP 4054MP 4054

MP 5054MP 5054

MP 6054MP 6054

Smart Operation Panel Type M3Smart Operation Panel Type M3

Step 2: Paper Tray & Optional Accessories

Paper Feed Unit Type PB3150 (1 x 550 Sheets)Paper Feed Unit Type PB3150 (1 x 550 Sheets)

Caster Table Type M3Caster Table Type M3

Paper Feed Unit PB3220 (2 x 550 Sheets)Paper Feed Unit PB3220 (2 x 550 Sheets)

LCIT PB3230 (Tandem LCT)LCIT PB3230 (Tandem LCT)

LCIT RT3030 (1,500 Sheets)LCIT RT3030 (1,500 Sheets)

Cabinet Type FCabinet Type F

Step 3: Output & Finishing Options

One-Bin Tray BN3110One-Bin Tray BN3110

Internal Shift-Sort Tray SH3070Internal Shift-Sort Tray SH3070

Internal Finisher SR3130Internal Finisher SR3130

Finisher SR3140 (1,000 Sheet External)Finisher SR3140 (1,000 Sheet External)

Finisher SR3160 (3,000 Sheet External)Finisher SR3160 (3,000 Sheet External)

Booklet Finisher SR3150 (1,000 Sheet External)Booklet Finisher SR3150 (1,000 Sheet External)

Booklet Finisher SR3170 (2,000 Sheet External)Booklet Finisher SR3170 (2,000 Sheet External)

Bridge Unit BU3070Bridge Unit BU3070

Punch Unit PU3040NAPunch Unit PU3040NA

Punch Unit PU3050NAPunch Unit PU3050NA

Punch Unit PU3060NAPunch Unit PU3060NA

Step 4: Print/Scan Options

IEEE1284 Interface Board Type AIEEE1284 Interface Board Type A

IEEE802.11a/b/g/n Interface Unit Type M2IEEE802.11a/b/g/n Interface Unit Type M2

PostScript3 Unit Type M12PostScript3 Unit Type M12

SD Card for NetWare Printing Type M12SD Card for NetWare Printing Type M12

File Format Converter Type EFile Format Converter Type E

Browser Unit Type M12Browser Unit Type M12

HotSpot MFP Option Type SHotSpot MFP Option Type S

OCR Unit Type M2OCR Unit Type M2

IPDS Unit Type M12IPDS Unit Type M12

XPS Direct Print Option Type M12XPS Direct Print Option Type M12

Step 5: Fax Options

Fax Option Type M12Fax Option Type M12

Fax Connection Unit Type M12Fax Connection Unit Type M12

G3 Interface Unit Type M12G3 Interface Unit Type M12

Memory Unit Type M12 (64MB)Memory Unit Type M12 (64MB)

Step 6: Security & Miscellaneous Accessories

Type MP 2554 Removable Hard Drive (RHD)Type MP 2554 Removable Hard Drive (RHD)

Type MP 2554 Additional Removable Hard Drive (ARHD)Type MP 2554 Additional Removable Hard Drive (ARHD)

Optional Counter Interface Unit Type M12Optional Counter Interface Unit Type M12

Key Counter Bracket Type M3Key Counter Bracket Type M3

Card Reader Bracket Type 3352Card Reader Bracket Type 3352

ESP XG-PCS-15DESP XG-PCS-15D

Copy Data Security Unit Type GCopy Data Security Unit Type G

Smart Card Reader Built-in Unit Type M12Smart Card Reader Built-in Unit Type M12

Certified DataOverwrite Security System Type ICertified DataOverwrite Security System Type I

External Keyboard Bracket Type M3External Keyboard Bracket Type M3

External USB Keyboard (No Bracket)External USB Keyboard (No Bracket)

Step 7: Supplies

Print Cartridge MP 6054Print Cartridge MP 6054

Staple Set Type T for Internal Finisher SR3130/SR3140/SR3160/SR3170 (Normal Stapling)Staple Set Type T for Internal Finisher SR3130/SR3140/SR3160/SR3170 (Normal Stapling)

Staple Refill Type T for Internal Finisher SR3130/SR3140/SR3160/SR3170 (Normal Stapling)Staple Refill Type T for Internal Finisher SR3130/SR3140/SR3160/SR3170 (Normal Stapling)

Staple Set Type W for SR3170 (Saddle Stitch)Staple Set Type W for SR3170 (Saddle Stitch)

Staple Refill Type W for SR3170 (Saddle Stitch)Staple Refill Type W for SR3170 (Saddle Stitch)

Staple Set Type S for SR3150 (Normal and Saddle Stitch) Uses Type K Refill Staple Set Type S for SR3150 (Normal and Saddle Stitch) Uses Type K Refill

Staple Refill Type K for SR3150 (Normal and Saddle Stitch)Staple Refill Type K for SR3150 (Normal and Saddle Stitch)

Standard Features Include

Current Configuration

Current Configuration

Stay notified about RICOHConfigurator.com

Staple Set Type T for Internal Finisher SR3130/SR3140/
SR3160/SR3170 (Normal Stapling)Staple Set Type T for Internal Finisher SR3130/SR3140/
SR3160/SR3170 (Normal Stapling)

Staple Refill Type T for Internal Finisher SR3130/SR3140/
SR3160/SR3170 (Normal Stapling)Staple Refill Type T for Internal Finisher SR3130/SR3140/
SR3160/SR3170 (Normal Stapling)