RICOH Online Configurator

RICOH MP C6502/MP C8002

Multifunction Color (ARCHIVED)

The RICOH MP C6502/MP C8002 Color Multifunction Series uses cutting-edge laser technology to produce fast, exceptional color output. Designed to save power, paper and operating costs, these innovative MFPs offer intuitive end-to-end control to improve workflow for everyday tasks.

With these systems you can produce documents in sizes up to 13" x 19.2" and use a range of paper handling and robust finishing capabilities. Plus, with an image resolution of up to 1200 x 4800 dpi and a paper capacity of up to 8,100 sheets, these systems can be used as your standalone, primary systems or as an integral part of a Ricoh Managed Document Services (MDS) strategy.

Please Note:

Selected items that require additional options will automatically be selected.
Some items are not compatible with other options; non-compatible options will be disabled from selection.

Step 1: Main Unit

	Item/Description	Tips	Item #	Thumbnail
	MP C6502MP C6502 Output Speed (Letter): 65-ppm Recommended Monthly Volume: 20,000 impressions/month Maximum Monthly Volume: 150,000 impressions/month Maximum Duty Cycle: 300,000 impressions/month Power Requirements: 120V/20A/60Hz (dedicated) Note: RICOH MP C6502 cannot be installed with ESP XG-PCS-20820D.	MP C6502 The item(s) below are not compatible with this option and cannot be selected: ESP XG-PCS-20820D (007138MIU)	416623
	MP C8002MP C8002 Output Speed (Letter): 80-ppm Recommended Monthly Volume: 30,000 impressions/month Maximum Monthly Volume: 150,000 impressions/month Maximum Duty Cycle: 300,000 impressions/month Power Requirements: 208–240V/20A/60Hz (dedicated) Note: RICOH MP C8002 cannot be installed with ESP XG-PCS-20D.	MP C8002 The item(s) below are not compatible with this option and cannot be selected: ESP XG-PCS-20D (006429MIU)	416627

Step 2: Paper Handling & Additional Paper Sources

	Item/Description	Tips	Item #
Input
	LCIT RT4020 (LT LCT)LCIT RT4020 (LT LCT) 4,400 sheet Large Capacity Tray that supports paper sizes up to 8.5" x 11"/A4 and up to 80 lb. Cover stock (216 gsm). Note: LCIT RT4020 cannot be installed with LCIT RT4030.	LCIT RT4020 (LT LCT) The item(s) below are not compatible with this option and cannot be selected: LCIT RT4030 (13" x 19.2" DLT LCT) (416638)	416699
	8 1/2" x 14" Paper Size Tray Type M28 1/2" x 14" Paper Size Tray Type M2 Adds ability to run 8.5" x 14" from the RT4020 LCT only. Note: LCIT RT4020 must be selected to add this option.	8 1/2" x 14" Paper Size Tray Type M2 At least one of the item(s) below must be selected to be able to select this item: LCIT RT4020 (LT LCT) (416699)	416637
	LCIT RT4030 (13" x 19.2" DLT LCT)LCIT RT4030 (13" x 19.2" DLT LCT) 2,200 sheet Large Capacity Tray that supports paper sizes from 5.5" x 8.5" to 13" x 19.2" and up to 110 lb. Cover stock (300 gsm). Note: LCIT RT4030 cannot be installed with LCIT RT4020 or 8 1/2" x 14" Paper Size Tray Type M2).	LCIT RT4030 (13" x 19.2" DLT LCT) The item(s) below are not compatible with this option and cannot be selected: LCIT RT4020 (LT LCT) (416699) 8 1/2" x 14" Paper Size Tray Type M2 (416637)	416638
	A3/11"x17" Tray Unit Type M2A3/11"x17" Tray Unit Type M2 Converts the Tandem Tray, tray 1 on the main unit, to a single 11" x 17"/A3 tray.	No tooltip available.	416641
	Tab Sheet Holder Type M2Tab Sheet Holder Type M2 Allows users to set up and print on tabs to separate chapters within the document, eliminating the manual collation of document sets. Can be used in either Tray 2 or Tray 3, but not both.	No tooltip available.	416642

Step 3: Finishing Options

External
	Item/Description	Tips	Item #	Thumbnail
	Copy Tray Type M2Copy Tray Type M2 Output tray that is only used when configuring the mainframe without a finisher. Note: Cover Tray Type M2 cannot be installed with these options or any option associated with these options: SR4090, SR4100, SR4110, Punch Unit PU5000 NA,CF5010 Cover Feeder, Punch Unit PU3060 NA, Staple Set Type SR90 for BK5010e, Staple Set Type M for SR4110, Staple Refill Type M for SR4110, Staple Set Type V for SR4090/SR4100, Staple Refill Type V for SR4090/SR4100, Staple Set Type W for SR4100 or Staple Refill Type W for SR4100.	Copy Tray Type M2 The item(s) below are not compatible with this option and cannot be selected: Finisher SR4090 (416644) Finisher SR4110 (416632) Booklet Finisher SR4100 (416645) Output Jogger Unit Type M2 (416631) Cooling Fan Unit Type M2 (417005) Cover Interposer Tray CI4010 (416639) Cover Interposer Tray CI4020 (416640) Multi-Folding Unit FD4000 (415908) GBC StreamPunch Pro (404412) Mail Box CS4010 (416633) Booklet Maker BK5010e (404305) Trimmer TR5010e (404299) Book Folder BF5010e (404300) BK5010 Rail Unit (413105) Punch Unit PU3060 NA (416612) Punch Unit PU5000 NA (412983) Staple Set Type SR90 for BK5010e (411476) Staple Set Type M for SR4110 (413013) Staple Refill Type M for SR4110 (413026) Staple Set Type V for SR4090/SR4100 (416709) Staple Refill Type V for SR4090/SR4100 (416711) Staple Set Type W for SR4100 (Supports Saddle Stitch) (416710) Staple Refill Type W for SR4100 (Supports Saddle Stitch) (416712) CF5010 Cover Feeder (413102)	416634
	Finisher SR4090Finisher SR4090 For offices that produce collated and stapled sets of documents, the SR4090 helps shorten production time. The 3,000-Sheet Finisher offers multi-position staple finishing of up to 65 sheets for 8.5" x 11"/A4 sized media. Note: SR4090 cannot be installed with these options: SR4100, SR4110, Copy Tray Type M2, Cover Interposer Tray CI4020, GBC StreamPunch Pro, Booklet Maker BK5010e, Trimmer TR5010e, CF5010 Cover Feeder, Book Folder BF5010e, BK5010 Rail Unit, Punch Unit PU5000 NA, Staple Set Type SR90 for BK5010e, Staple Set Type M for SR4110, Staple Refill Type M for SR4110, Staple Set Type W for SR4100 or Staple Refill Type W for SR4100.	Finisher SR4090 The item(s) below are not compatible with this option and cannot be selected: Copy Tray Type M2 (416634) Finisher SR4110 (416632) Booklet Finisher SR4100 (416645) Cover Interposer Tray CI4020 (416640) GBC StreamPunch Pro (404412) Booklet Maker BK5010e (404305) Trimmer TR5010e (404299) Book Folder BF5010e (404300) BK5010 Rail Unit (413105) Punch Unit PU5000 NA (412983) Staple Set Type SR90 for BK5010e (411476) Staple Set Type M for SR4110 (413013) Staple Refill Type M for SR4110 (413026) Staple Set Type W for SR4100 (Supports Saddle Stitch) (416710) Staple Refill Type W for SR4100 (Supports Saddle Stitch) (416712) CF5010 Cover Feeder (413102)	416644
	Finisher SR4110Finisher SR4110 The 3,000-Sheet Finisher offers multi-position staple finishing of up to 100 sheets for 8.5" x 11"/A4 sized media. It provides three destinations for output and includes hole-punching capabilities as an option. Ideal for offices that create collated and stapled sets of documents. Note: SR4110 cannot be installed with these options: SR4090, SR4100, Copy Tray Type M2, Cover Interposer Tray CI4010, Output Jogger Unit Type M2, Mail Box CS4010, Punch Unit PU3060 NA, Staple Set Type V for SR4090/SR4100, Staple Refill Type V for SR4090/SR4100, Staple Set Type W for SR4100 or Staple Refill Type W for SR4100.	Finisher SR4110 The item(s) below are not compatible with this option and cannot be selected: Copy Tray Type M2 (416634) Finisher SR4090 (416644) Booklet Finisher SR4100 (416645) Output Jogger Unit Type M2 (416631) Cover Interposer Tray CI4010 (416639) Mail Box CS4010 (416633) Punch Unit PU3060 NA (416612) Staple Set Type V for SR4090/SR4100 (416709) Staple Refill Type V for SR4090/SR4100 (416711) Staple Set Type W for SR4100 (Supports Saddle Stitch) (416710) Staple Refill Type W for SR4100 (Supports Saddle Stitch) (416712)	416632
	Booklet Finisher SR4100Booklet Finisher SR4100 The 2,000-Sheet Booklet Finisher allows multiple page documents to be professionally finished as paginated, duplexed saddle-stitched folded booklets. It provides three destinations for output, includes hole-punching capabilities as an option. The SR4100 utilizes a folding technology that creates “flatter” overall booklets in sizes up to 20-sheets (based on 20 lb. Bond). Note: SR4100 cannot be installed with these options: SR4090, SR4110, Copy Tray Type M2, Cover Interposer Tray CI4020, GBC StreamPunch Pro, Booklet Maker BK5010e, Trimmer TR5010e, CF5010 Cover Feeder, Book Folder BF5010e, BK5010 Rail Unit, Punch Unit PU5000 NA, Staple Set Type SR90 for BK5010e, Staple Set Type M for SR4110 or Staple Refill Type M for SR4110.	Booklet Finisher SR4100 The item(s) below are not compatible with this option and cannot be selected: Copy Tray Type M2 (416634) Finisher SR4090 (416644) Finisher SR4110 (416632) Cover Interposer Tray CI4020 (416640) GBC StreamPunch Pro (404412) Booklet Maker BK5010e (404305) Trimmer TR5010e (404299) Book Folder BF5010e (404300) BK5010 Rail Unit (413105) Punch Unit PU5000 NA (412983) Staple Set Type SR90 for BK5010e (411476) Staple Set Type M for SR4110 (413013) Staple Refill Type M for SR4110 (413026) CF5010 Cover Feeder (413102)	416645
	Output Jogger Unit Type M2Output Jogger Unit Type M2 Aligns and straightens output delivered to either the Finisher SR4090 or the Booklet Finisher SR4100. Note: One of the following finishers must be selected to add this option: SR4090 or SR4100.	Output Jogger Unit Type M2 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Booklet Finisher SR4100 (416645)	416631
	Cooling Fan Unit Type M2Cooling Fan Unit Type M2 Option for the Finisher SR4090, the Finisher SR4110 and the Finisher SR4100. This option is recommended for customers that print high color coverages on coated/thick paper. Note: 1. One of the following finishers must be selected to add this option: SR4090, SR4110 or SR4100. 2. Output Jogger Unit Type M2 is recommended when adding this option. 3. This option is recommended for customers that print high color coverage on coated/thick paper.	Cooling Fan Unit Type M2 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Finisher SR4110 (416632) Booklet Finisher SR4100 (416645)	417005
	Cover Interposer Tray CI4010Cover Interposer Tray CI4010 Single Cover Interposer tray that allows for pre-printed covers and inserts to be easily fed into the finishing workflow at the touch of a button. This finishing option eliminates the need for time-consuming offline manual insertion and reduces the wear and tear on originals. Note: One of the following finishers must be selected to add this option: SR4100 or SR4090.	Cover Interposer Tray CI4010 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Booklet Finisher SR4100 (416645)	416639
	Cover Interposer Tray CI4020Cover Interposer Tray CI4020 Dual Cover Interposer tray that allows for pre-printed covers and inserts to be easily fed into the finishing workflow at the touch of a button. This finishing option eliminates the need for time-consuming offline manual insertion and reduces the wear and tear on originals. Note: SR4110 must be selected to add this option.	Cover Interposer Tray CI4020 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4110 (416632)	416640
	Multi-Folding Unit FD4000Multi-Folding Unit FD4000 This Multi-fold option allows for the creation of professionally finished documents such as newsletters, brochures, sales and marketing materials. Folding patterns include Half-fold, Letter Fold-in (Tri-fold), Letter Fold-Out (Tri-fold), Gate-Fold, Double Parallel (Four-Fold) and Z-Fold. Note: One of the following finishers must be selected to add this option: SR4090, SR4100 or SR4110.	Multi-Folding Unit FD4000 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Finisher SR4110 (416632) Booklet Finisher SR4100 (416645)	415908
	GBC StreamPunch ProGBC StreamPunch Pro Customer replaceable punch option (note: option color may not match mainframe MFP). Note: 1. SR4110 must be selected to add this option. 2. Requires the purchase of at least one GBC die set.	GBC StreamPunch Pro At least one of the item(s) below must be selected to be able to select this item: Finisher SR4110 (416632)	404412
	GBC Die Set 3 Hole (Ring Binder)GBC Die Set 3 Hole (Ring Binder) Standard use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Standard use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	001450MIU
	GBC Pro 3 Hole HD Die SetGBC Pro 3 Hole HD Die Set Production use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Production use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	404415
	GBC Die Set 11 Hole (Velobind)GBC Die Set 11 Hole (Velobind) Standard use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Standard use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	001451MIU
	GBC Die Set 19 Hole (Cerlox)GBC Die Set 19 Hole (Cerlox) Standard use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro. Note: 1. Standard use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	001452MIU
	GBC Pro 19 Hole HD Die SetGBC Pro 19 Hole HD Die Set Production use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Production use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	404416
	GBC Die Set 21 Hole (Twin Loop Wire 2:1)GBC Die Set 21 Hole (Twin Loop Wire 2:1) Standard use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Standard use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	001453MIU
	GBC Die Set 32 Hole (Twin Loop Wire 3:1)GBC Die Set 32 Hole (Twin Loop Wire 3:1) Standard use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Standard use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	001454MIU
	GBC Die Set 44 Hole (Color Coil)GBC Die Set 44 Hole (Color Coil) Standard use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Standard use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	001455MIU
	GBC Pro 44 Hole HD Die SetGBC Pro 44 Hole HD Die Set Production use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Production use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	404417
	GBC 32 Hole Pro Click Die SetGBC 32 Hole Pro Click Die Set Production use die set option for the GBC StreamPunch Pro. Only one can be installed inside the GBC StreamPunch Pro at a time. Note: 1. Production use die set option for use in the GBC StreamPunch Pro only. 2. Only 1 Die Set can be installed inside the GBC StreamPunch Pro at a time.	No tooltip available.	002493MIU
	Mail Box CS4010Mail Box CS4010 The 9-Bin Mailbox offers workgroups the ability to separate and stack document output to designated bins directly from the print driver. This option helps keep workflows streamlined and organized. The finisher can be configured with either the SR4100 Finisher or the SR4090 Finisher. Note: One of the following finishers must be selected to add this option: SR4100 or SR4090.	Mail Box CS4010 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Booklet Finisher SR4100 (416645)	416633
	Booklet Maker BK5010eBooklet Maker BK5010e When the system is configured with a SR4110 Finisher and the BK5010e Production Bookletmaker, the result is a fully-integrated system that produces saddle-stitched booklets up to 30-sheets at a time, the equivalent of a 120-page book. The finisher automatically adjusts for paper size and direction and supports booklet making directly from most drivers, making printing from any network seamless and easy. Note: SR4110 must be selected to add this option.	Booklet Maker BK5010e At least one of the item(s) below must be selected to be able to select this item: Finisher SR4110 (416632)	404305
	CF5010 Cover FeederCF5010 Cover Feeder Provides the ability to add pre-printed covers to booklets being made on the BK5010e. Note: BK5010e must be selected to add this option.	CF5010 Cover Feeder At least one of the item(s) below must be selected to be able to select this item: Booklet Maker BK5010e (404305)	413102
	Trimmer TR5010eTrimmer TR5010e Trims off the excess “creep” caused by folding multiple sheets, resulting in a clean flush finish. An additional accessory option for the BK5010e Production Bookletmaker. Note: BK5010e must be selected to add this option.	Trimmer TR5010e At least one of the item(s) below must be selected to be able to select this item: Booklet Maker BK5010e (404305)	404299
	Book Folder BF5010eBook Folder BF5010e Completes the booklets giving them the same professional flat finish as perfect bound books, with a printable spine with the appearance of a magazine. An additional accessory option for the BK5010e Production Bookletmaker. Note: BK5010e must be selected to add this option.	Book Folder BF5010e At least one of the item(s) below must be selected to be able to select this item: Booklet Maker BK5010e (404305)	404300
	BK5010 Rail UnitBK5010 Rail Unit Helps dock/undock the BK5010e Production Bookletmaker from the SR4110 Finisher. Note: BK5010e must be selected to add this option.	BK5010 Rail Unit At least one of the item(s) below must be selected to be able to select this item: Booklet Maker BK5010e (404305)	413105
Hole Punching
	Item/Description	Tips	Item #	Thumbnail
	Punch Unit PU3060 NAPunch Unit PU3060 NA Optional 2/3 hole punching option for either the SR4090 or SR4100. Note: 1. SR4090 or SR4100 must be selected to add this option. 2. Punch Unit PU3060 NA cannot be installed with SR4110.	Punch Unit PU3060 NA At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Booklet Finisher SR4100 (416645)	416612
	Punch Unit PU5000 NAPunch Unit PU5000 NA Optional 2/3 hole punching option for the SR4110. Note: 1. SR4110 must be selected to add this option. 2. Punch Unit PU5000 NA cannot be installed with SR4090 or SR4100.	Punch Unit PU5000 NA At least one of the item(s) below must be selected to be able to select this item: Finisher SR4110 (416632)	412983

Step 4: Print/Scan Options

Network Environment
	Item/Description	Tips	Item #	Thumbnail
	IEEE1284 Interface Board Type AIEEE1284 Interface Board Type A Allows device connection with legacy computer equipment. Note: This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, File Format Converter Type E, Hot Folders Type FS-100, Auto Trap Type FS-100, Fiery Color Controller E-22B, Fiery Impose FS-100, Fiery Compose FS-100, Spot-On Type FS-100, Fiery Color Profiler Suite V4.0 or EFI Productivity Pack.	IEEE1284 Interface Board Type A The item(s) below are not compatible with this option and cannot be selected: IEEE 802.11a/g/n Interface Unit Type M2 (416572) File Format Converter Type E (414007) Fiery Color Controller E-22B (404501) Fiery Impose FS-100 (404598) Fiery Compose FS-100 (404582) Spot-On Type FS-100 (404601) Fiery Color Profiler Suite V4.0 (007091MIU) Hot Folders Type FS-100 (404600) Auto Trap Type FS-100 (404602) EFI Productivity Pack (007183MIU)	411699
	IEEE 802.11a/g/n Interface Unit Type M2IEEE 802.11a/g/n Interface Unit Type M2 Allows MFP device to connect to the network over WiFi. Useful for temporary sites and locations where cabling is impractical. Note: This option cannot be installed with IEEE1284 Interface Board Type A, Format Converter Type E, Hot Folders Type FS-100, Auto Trap Type FS-100, Fiery Color Controller E-22B, Fiery Impose FS-100, Fiery Compose FS-100, Spot-On Type FS-100, Fiery Color Profiler Suite V4.0 or EFI Productivity Pack.	IEEE 802.11a/g/n Interface Unit Type M2 The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) File Format Converter Type E (414007) Fiery Color Controller E-22B (404501) Fiery Impose FS-100 (404598) Fiery Compose FS-100 (404582) Spot-On Type FS-100 (404601) Fiery Color Profiler Suite V4.0 (007091MIU) Hot Folders Type FS-100 (404600) Auto Trap Type FS-100 (404602) EFI Productivity Pack (007183MIU)	416572
	PostScript3 Unit Type M2PostScript3 Unit Type M2 Required for Macintosh and PostScript printing environments. Recommended for printing more complex color and PDF files. Note: This option cannot be installed with Hot Folders Type FS-100, Auto Trap Type FS-100, Fiery Color Controller E-22B, Fiery Impose FS-100, Fiery Compose FS-100, Spot-On Type FS-100, Fiery Color Profiler Suite V4.0 or EFI Productivity Pack.	PostScript3 Unit Type M2 The item(s) below are not compatible with this option and cannot be selected: Fiery Color Controller E-22B (404501) Fiery Impose FS-100 (404598) Fiery Compose FS-100 (404582) Spot-On Type FS-100 (404601) Fiery Color Profiler Suite V4.0 (007091MIU) Hot Folders Type FS-100 (404600) Auto Trap Type FS-100 (404602) EFI Productivity Pack (007183MIU)	416657
	SD Card for NetWare Printing Type M2SD Card for NetWare Printing Type M2 Used by customers who print using Netware. This option is required for the following functions: Use of iPrint ports, SNMP via IPX and Scan to NCP (IPX, TCP/IP). Note: This option cannot be installed with Hot Folders Type FS-100, Auto Trap Type FS-100, Fiery Color Controller E-22B, Fiery Impose FS-100, Fiery Compose FS-100, Spot-On Type FS-100, Fiery Color Profiler Suite V4.0 or EFI Productivity Pack.	SD Card for NetWare Printing Type M2 The item(s) below are not compatible with this option and cannot be selected: Fiery Color Controller E-22B (404501) Fiery Impose FS-100 (404598) Fiery Compose FS-100 (404582) Spot-On Type FS-100 (404601) Fiery Color Profiler Suite V4.0 (007091MIU) Hot Folders Type FS-100 (404600) Auto Trap Type FS-100 (404602) EFI Productivity Pack (007183MIU)	416669
	File Format Converter Type EFile Format Converter Type E Required to convert format and drag to desktop documents stored via Copy or Print mode. Note: This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2 or IEEE1284 Interface Board Type A.	File Format Converter Type E The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572)	414007
Cloud Based Options
	Item/Description	Tips	Item #	Thumbnail
	Browser Unit Type M2Browser Unit Type M2 Used for Browser features like Integrated Cloud Environment (ICE). Also required with HotSpot MFP Option Type S to enable HotSpot printing. Not compatible with all websites.	No tooltip available.	416666
	Embedded HotSpot Type SEmbedded HotSpot Type S Required to enable HotSpot printing. One year HotSpot subscription service included. Note: By choosing this option, Browser Unit Type M2 will be added to your configuration.	Embedded HotSpot Type S The item(s) below will be selected if this item is selected: Browser Unit Type M2 (416666)	415620
Print/Scanning Features
	Item/Description	Tips	Item #	Thumbnail
	IPDS Unit Type M2IPDS Unit Type M2 Intelligent Printer Data Stream (IPDS); As a "genuine" IPDS solution built on original IBM® source code, our IPDS option provides more accurate interpretation of IPDS data. That means less errors and faster file processing than emulations. Plus, as an IBM® partner your customers can be assured of fast problem resolution and timely upgrades. Note: This option cannot be installed with Hot Folders Type FS-100, Auto Trap Type FS-100, Fiery Color Controller E-22B, Fiery Impose FS-100, Fiery Compose FS-100, Spot-On Type FS-100, Fiery Color Profiler Suite V4.0 or EFI Productivity Pack.	IPDS Unit Type M2 The item(s) below are not compatible with this option and cannot be selected: Fiery Color Controller E-22B (404501) Fiery Impose FS-100 (404598) Fiery Compose FS-100 (404582) Spot-On Type FS-100 (404601) Fiery Color Profiler Suite V4.0 (007091MIU) Hot Folders Type FS-100 (404600) Auto Trap Type FS-100 (404602) EFI Productivity Pack (007183MIU)	416660
	OCR Unit Type M2OCR Unit Type M2 This function embeds invisible texts on scanned images of PDF and enables users to search PDF files by arbitrary keywords. Searchable PDF files can be sent to email, folders and external media (SD/USB).	No tooltip available.	416605
	Unicode Font Package for SAP(R) 1 LicenseUnicode Font Package for SAP(R) 1 License Supports multi-language printing for global business environments.	No tooltip available.	413009
	Unicode Font Package for SAP(R) 10 LicenseUnicode Font Package for SAP(R) 10 License Supports multi-language printing for global business environments.	No tooltip available.	413010
	Unicode Font Package for SAP(R) 100 LicenseUnicode Font Package for SAP(R) 100 License Supports multi-language printing for global business environments.	No tooltip available.	413011

Step 5: Fiery

Item/Description	Tips	Item #
Fiery Color Controller E-22BFiery Color Controller E-22B Optional Fiery Color Controller; can also be combined with the standard Print/Scan controller for standard scan features and Fiery print. Note: This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	Fiery Color Controller E-22B The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	404501
Fiery Impose FS-100Fiery Impose FS-100 Fiery option that helps to automate and streamline labor-intensive prepress tasks. Note: 1. By choosing this option, Fiery Color Controller E-22B will be added to your configuration. 2. This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	Fiery Impose FS-100 The item(s) below will be selected if this item is selected: Fiery Color Controller E-22B (404501) The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	404598
Fiery Compose FS-100Fiery Compose FS-100 Fiery option that provides intuitive tools that make advanced document preparation simple and quick. Note: 1. By choosing this option, Fiery Color Controller E-22B will be added to your configuration. 2. This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	Fiery Compose FS-100 The item(s) below will be selected if this item is selected: Fiery Color Controller E-22B (404501) The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	404582
Spot-On Type FS-100Spot-On Type FS-100 Fiery option that enables you to reproduce custom or spot colors. Note: 1. By choosing this option, Fiery Color Controller E-22B will be added to your configuration. 2. This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	Spot-On Type FS-100 The item(s) below will be selected if this item is selected: Fiery Color Controller E-22B (404501) The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	404601
Fiery Color Profiler Suite V4.0Fiery Color Profiler Suite V4.0 Contains Color Profiler V4 software and ES-2000 Spectrophotometer: Includes 1 year of phone support. Note: 1. By choosing this option, Fiery Color Controller E-22B will be added to your configuration. 2. This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	Fiery Color Profiler Suite V4.0 The item(s) below will be selected if this item is selected: Fiery Color Controller E-22B (404501) The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	007091MIU
Hot Folders Type FS-100Hot Folders Type FS-100 Fiery option that enables the creation of special folders that can assign a group of print options. Note: 1. By choosing this option, Fiery Color Controller E-22B will be added to your configuration. 2. This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	Hot Folders Type FS-100 The item(s) below will be selected if this item is selected: Fiery Color Controller E-22B (404501) The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	404600
Auto Trap Type FS-100Auto Trap Type FS-100 Fiery option that provides a fast and simple way to ensure that your image output is always the best that it can be. Note: 1. By choosing this option, Fiery Color Controller E-22B will be added to your configuration. 2. This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	Auto Trap Type FS-100 The item(s) below will be selected if this item is selected: Fiery Color Controller E-22B (404501) The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	404602
ES-2000 SpectrophotometerES-2000 Spectrophotometer For customers that only want calibration capability. Only the spectrophotometer.	No tooltip available.	007095MIU
Fiery CPS V4.0 Software onlyFiery CPS V4.0 Software only For customers that have an ES-2000 Spectrophotometer and want Color Profiler V4 software: Includes 1 year of phone support.	No tooltip available.	007096MIU
EFI Productivity PackEFI Productivity Pack Fiery option that aids in workflow productivity - helps meet tight turnaround times/produce top notch color documents while achieving process automation. Note: 1. By choosing this option, Fiery Color Controller E-22B will be added to your configuration. 2. This option cannot be installed with IEEE 802.11a/g/n Interface Unit Type M2, IEEE1284 Interface Board Type A, PostScript3 Unit Type M2, SD Card for NetWare Printing Type M2 or IPDS Unit Type M2.	EFI Productivity Pack The item(s) below will be selected if this item is selected: Fiery Color Controller E-22B (404501) The item(s) below are not compatible with this option and cannot be selected: IEEE1284 Interface Board Type A (411699) IEEE 802.11a/g/n Interface Unit Type M2 (416572) PostScript3 Unit Type M2 (416657) SD Card for NetWare Printing Type M2 (416669) IPDS Unit Type M2 (416660)	007183MIU

Step 6: Fax Options

Item/Description	Tips	Item #
Fax Option Type M2Fax Option Type M2 Installation required to enable fax services: 33.6Kbps, approximately 2 Second Transmission Speed, Standard JBIG. Standard 320 Pages Memory. Includes standard Internet Fax (T.37), LAN Fax, IP-Fax (T.38), Fax Forwarding to Email & Paperless Fax function.	No tooltip available.	416651
Fax Connection Unit Type M2Fax Connection Unit Type M2 Enables users to send and receive faxes on a sub MFP via a main MFP. This option is required on both the Main MFP that has the Fax Option Type M2 installed and on the Sub MFP(s) needing remote fax. Note: By choosing this option, Fax Option Type M2 will be added to your configuration.	Fax Connection Unit Type M2 The item(s) below will be selected if this item is selected: Fax Option Type M2 (416651)	416663
G3 Interface Unit Type M2G3 Interface Unit Type M2 Up to two additional lines can be installed. For a maximum total of 3 lines. Note: By choosing this option, Fax Option Type M2 will be added to your configuration.	G3 Interface Unit Type M2 The item(s) below will be selected if this item is selected: Fax Option Type M2 (416651)	416655
Memory Unit Type B 32MBMemory Unit Type B 32MB Increases fax memory to 2,240 pages and fax resolution to 400 x 400 dpi. Note: By choosing this option, Fax Option Type M2 will be added to your configuration.	Memory Unit Type B 32MB The item(s) below will be selected if this item is selected: Fax Option Type M2 (416651)	001342MIU

Step 7: Security & Miscellaneous Accessories

Item/Description	Tips	Item #
Smart Card Reader Built-in Unit Type M2Smart Card Reader Built-in Unit Type M2 For use with RICOH & third party software solutions. The smart card reader and its cable will be covered inside the mainframe when this option is attached. Not all card readers may be supported.	No tooltip available.	416729
Optional Counter I/F Type AOptional Counter I/F Type A Optional 20-Pin Interface used to attach external key counter or key card device.	No tooltip available.	413012
Copy Data Security Unit Type GCopy Data Security Unit Type G Prevents unauthorized copying of confidential documents that were created on other printers that have this option installed.	No tooltip available.	416391
ESP XG-PCS-20DESP XG-PCS-20D Optional Power Filter for the MP C6502. RICOH Advanced Technical Support (ATS) recommends the use of Power Protection products to minimize potential electrical interference with products. Note: MP C6502 must be selected to add this option.	No tooltip available.	006429MIU
ESP XG-PCS-20820DESP XG-PCS-20820D Optional Power Filter for the MP C8002SP. RICOH Advanced Technical Support (ATS) recommends the use of Power Protection products to minimize potential electrical interference with products. Note: MP C8002 must be selected to add this option.	ESP XG-PCS-20820D At least one of the item(s) below must be selected to be able to select this item: MP C8002 (416627)	007138MIU
External Keyboard Bracket OnlyExternal Keyboard Bracket Only Mounting bracket for the External USB Keyboard. Note: Mounting Bracket only.	No tooltip available.	007111MIU
External USB Keyboard OnlyExternal USB Keyboard Only Optional External USB Keyboard. Note: Keyboard only.	No tooltip available.	100266FNG

Step 8: Supplies

Item/Description	Tips	Item #
Print Cartridge Black MP C8002Print Cartridge Black MP C8002 Unit Packaging: 1 - 1,066g. Cartridge Note: Must order at least one with either the MP C6502 or the MP C8002.	No tooltip available.	842083
Print Cartridge Yellow MP C8002Print Cartridge Yellow MP C8002 Unit Packaging: 1 - 686g. Cartridge Note: Must order at least one with either the MP C6502 or the MP C8002.	No tooltip available.	842084
Print Cartridge Magenta MP C8002Print Cartridge Magenta MP C8002 Unit Packaging: 1 - 762g. Cartridge Note: Must order at least one with either the MP C6502 or the MP C8002.	No tooltip available.	842085
Print Cartridge Cyan MP C8002Print Cartridge Cyan MP C8002 Unit Packaging: 1 - 706g. Cartridge Note: Must order at least one with either the MP C6502 or the MP C8002.	No tooltip available.	842086
Waste Toner Bottle MP C8002Waste Toner Bottle MP C8002 Unit Packaging: 1 - Each Note: Should order at least one for either the MP C6502 or the MP C8002.	No tooltip available.	416889
Staple Set Type SR90 for BK5010eStaple Set Type SR90 for BK5010e Unit Packaging: 4 - Ctgs; 5,000 Staples per Cartridge Total: 20,000 Note: Booklet Maker BK5010e must be selected to add this supply.	Staple Set Type SR90 for BK5010e At least one of the item(s) below must be selected to be able to select this item: Booklet Maker BK5010e (404305)	411476
Staple Set Type M for SR4110Staple Set Type M for SR4110 Unit Packaging: 1 - Crtg; 5,000 Staples per Cartridge Note: Finisher SR4110 must be selected to add this supply.	Staple Set Type M for SR4110 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4110 (416632)	413013
Staple Refill Type M for SR4110Staple Refill Type M for SR4110 Unit Packaging: 5 - Ctgs; 5,000 Staples per Cartridge Total: 25,000 Note: Finisher SR4110 must be selected to add this supply.	Staple Refill Type M for SR4110 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4110 (416632)	413026
Staple Set Type V for SR4090/SR4100Staple Set Type V for SR4090/SR4100 Unit Packaging: 1 - Ctg; 5,000 Staples per Cartridge Note: 1. Finisher SR4090 or Booklet Finisher SR4100 must be selected to add this supply. 2. This item is for regular stapling.	Staple Set Type V for SR4090/SR4100 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Booklet Finisher SR4100 (416645)	416709
Staple Refill Type V for SR4090/SR4100Staple Refill Type V for SR4090/SR4100 Unit Packaging: 3 - Ctgs; 5,000 Staples per Cartridge Total: 15,000 Note: 1. Finisher SR4090 or Booklet Finisher SR4100 must be selected to add this supply. 2. This item is for regular stapling.	Staple Refill Type V for SR4090/SR4100 At least one of the item(s) below must be selected to be able to select this item: Finisher SR4090 (416644) Booklet Finisher SR4100 (416645)	416711
Staple Set Type W for SR4100 (Supports Saddle Stitch) Staple Set Type W for SR4100 (Supports Saddle Stitch) Unit Packaging: 1 - Ctg; 2,000 Staples per Cartridge Note: 1. Booklet Finisher SR4100 must be selected to add this supply. 2. This option supports saddle stitch.	Staple Set Type W for SR4100 (Supports Saddle Stitch) At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR4100 (416645)	416710
Staple Refill Type W for SR4100 (Supports Saddle Stitch)Staple Refill Type W for SR4100 (Supports Saddle Stitch) Unit Packaging: 4 - Ctgs; 2,000 Staples per Cartridge Total: 8,000 Note: 1. Booklet Finisher SR4100 must be selected to add this supply. 2. This item supports saddle stitch.	Staple Refill Type W for SR4100 (Supports Saddle Stitch) At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR4100 (416645)	416712